Table of Contents
Advertisement
2. Leaving the knob pulled out, position a film
cartridge in the chamber with the
project-
ing-spool end toward the bottom of the
camera. Then push the back-cover release
knob all the way in, rotating it slightly to do
so if necessary.
3.
Insert the end of the film leader as shown
into one of the slots in the take-up spool so
that the tooth is engaged with a sprocket
hold near the end of the
leader.
Make su re
that the end of the leader does not project
from another slot between tabs on the
spool
.
15
Advertisement
Table of Contents
