Cooling · Heating · Fan Operation - Daikin RXYMQ3AV4A Operation Manual

COOLING · HEATING · FAN Operation
OPERATION
This operation manual describes the explanation for a case in which the wired remote controller is used.
When using the wireless remote controller, refer to the attached operation manual.
• Changeover cannot be made with a remote controller whose display shows "
• When the display "
• For protecting the mechanism, supply the power for 6 house at first, then operate the air conditioner.
FOR SYSTEMS WITHOUT COOL/HEAT CHANGEOVER REMOTE CONTROLLER
1.
Press OPERATION MODE SELECTOR button several times and select the OPERATION MODE of your choice as follows.
COOLING Operation......."
2.
Press ON/OFF button.
OPERATION lamp lights up and the system starts OPERATION.
FOR SYSTEMS WITH COOL/HEAT CHANGEOVER REMOTE CONTROLLER (Only for the heat pump)
Cooling Operation
1
1.
Select operation mode with the cool/heat changeover remote controller as follows:
COOLING Operation......."
2.
Press ON/OFF button.
OPERATION lamp lights up and the system starts OPERATION.
Adjustment
3.
Press TEMPERATURE SETTING button and program the setting temperature.
Each time this button is pressed, setting temperature rises 1°C.
Each time this button is pressed, setting temperature lowers 1°C.
NOTE:
• Set the temperature within the operation range shown in the table on page 7.
• The temperature cannot be set in the fan operation.
" (CHANGEOVER UNDER CONTROL) flashes, refer to page 13.
BRC1C62
TEST
" HEATING Operation .... "
Heating Operation
1 1
1
" " " HEATING Operation .... "
2·6
C
H
1
5
4
3
"
Fan Operation
1
" "
" (CHANGEOVER UNDER CONTROL).
FAN Operation...... "
BRC1C62
2·6
5
4
3
" FAN Operation...... "
"
"
8