Sony STR-DE185 Operating Instructions Manual page 23

FM tuner section
Tuning range 87.5 - 108.0 MHz
Antenna terminals 75 ohms, unbalanced
Intermediate frequency
10.7 MHz
Sensitivity
Mono: 18.3 dBt_ 2.2 pV/75 ohms
Stereo: 38.3 dBf, 22.5 pV/75 ohms
Usable sensitivity 11.2 dBf, 1 pV/75 ohms
S/N
Mono: 76 dB
Stereo: 70 dB
Harmonic distortion at I kHz
Mono: 0.5c_
Stereo: 0.8%
SepsratIon
35 dB at I kttz
Frequency response 30 Hz- 15 kHz,
+0.5/-2 dB
Selectivity
60 dB at 4(X) kttz
AM tuner section
Tuning range
Models of area code U
With lO-kIlz tuning scale: 530 - 1710 kHz _>
With 9-kHz tuning scale: 531 - 1710kHz _/
Models of area code CEL, CEK
With 9-kHz luning scale: 531 - 1602 kHz
Antenna
Loop amenna
Intermediate frequency
450 kttz
Usable sensitivity
50 dB/m (at I ,g00 kHz or
999 kttz)
S/N
45 dB (at 50 mV/m)
Harmonic distortion
1.fi % (50 mY/m,
40{) Hz)
Selectivity
At 9 kttz: 35 dB
At 10 kHz: 40 dB
4) You call change tile AM tuning scale to 9 ktlz or
10 kHz. After tuning in any AM station, turn off
lhe receiver. Hold down PRESET TUNING + and
press I/Q). All preset stations will be erased when
you change [he tuning scale. To rese[ the scale to
10 kHz (or 9 kHz), repeat the procedure.
General
Power requirements
Area code Power requirements
U 120 V AC, 60 Hz
CEL, CEK 230 V AC, 50/60 Hz
Power consumption
Area code Power consumption
U 190 W
CEL, CEK 210 W
Power consumption (during standby mode)
0.5 W (tbr models of all area code)
AC outlets
Area code AC outlets
U 1 swilched, 120 W/1A MAX
CEL, CEK 1 switched, 100 W MAX
Dimensions
430 x 145 x 3(Xlmm
(167/, x 5% x 1!% in.)
including projecting parts
and controls
Mass (Approx.) 7.0 kg (15 Ib 7 oz)
Supplied accessories
FM wire antenna (I)
AM loop antenna (1)
Remo_e commander RM-U 185 ( 1)
R6 (size-AA) batteries (2)
For details on the area code of the component you
ale using, see page 4.
Design and specifications are subject to change
without no0ce.
g
O
m_
m
o
II
236B