Sony STR-DE185 Operating Instructions Manual page 19

Recording on a video tape
You can record l¥om a VCR, a TV, or an LD
player using the receiver. You can also add
audio from a variety of audio sources when
editing a video tape. See the operating
instructions of your VCR or LD player if you
need help.
1
Select the program source to be
recorded.
2
Prepare the component for playing.
For example, insert the laser disc you want
to record into the LD player.
3
Insert a blank video tape into the VCR
(VIDEO 1) for recording.
4 Start recording on the recording VCR,
then start playing the video tape or
laser disc you want to record.
Tip
You can record lhe sound from ally audio source onto
a video tape while copying from a video tape or laser
disc. Locate the point where you want to start
recording fl'om another audio source, select the
program source, |hen slal"i playback. The audio from
that source will be recorded onto the audio track of
tile video tape instead of the audio from the original
medium. To resume audio recording fl'om the original
medium, select the video source again.
You can set the receiver to turn off
automatically at a specified time.
Press SLEEP on the front panel (except
for models of area code CEL, CEK) or on
the remote while the power is on.
Each time you press the button, the display
ch*mges cyclically as follows:
2-00-00 _q. 1-30-00*-+ I - 00-00 _q.
O- 30-00 _. OFF
The display dims after you have specified the
time.
Tip
To check the remaining time before the receiver turns
oft', press SLEEP. The remaining time appeal_ in lhe
display.
9
:r
O
11
ii1
o
19
GB