Table of Contents
Advertisement
To record a programme at the same time everyday,
press the DAY button after the last number, '7', lights so
that all the indicators from 1 to 7 light. The timer-activated
recording will be made everyday at the same
time if you
leave the TIMER REC button depressed, as long as the tape
lasts.
so ee ee Se Se
To record to the end of the tape,
set the turn-off time to "--:--".
To set to ''-- : --"', set the turn-off time at the same time as
the preset turn-on time. ''-- : -- will appear on the time in-
dicator when the TURN OFF button is pressed for checking.
Recording
will continue
to the end of the tape and the
recorder will automatically turn off at that time.
NOTICE:
ONCE
THE
TIMER
REC
LAMP
HAS
LIT
UP, NO FUNCTION OF THE RECORDER
CAN BE AC-
TIVATED,
except
the
timer
section
settings.
To
operate the recorder after setting the timer for record-
ing, depress the TIMER REC button to release it.
if the TIMER REC lamp does not light when you depress the
TIMER REC button, check the following :
—Did you insert a cassette?
—Does the cassette inserted have a safety tab on the bot-
tom?
—Did you interrupt a timer-activated recording by pressing
the
M/A
button?
(See
"To
stop
a_timer-activated
recording")
Checking the timer setting
Press the TURN
ON button to check the turn-on day/time
and the TURN OFF button to check the turn-off time. You
can reset the turn-on day/time and turn-off time separately,
if necessary.
When
the timer-activated recording is finished, press the
TIMER REC button to release it.
If you leave the TIMER
REC button depressed, the timer
recroding will be activated at the same time on the same
day of the next week, as long as tape remains.
To stop a timer-activated recording,
Press the (/4
button and the recorder will be turned off.
To set the unit to make
the next timer recording on the
Same cassette, remove the cassette and insert it again. (If
this is not done, the TIMER REC lamp wil! not light even if
the TIMER REC button is pressed.)
For other operations, first press the TIMER REC button to
release it, then press the ON/STANDBY
button to turn on
the recorder.
WHEN A POWER INTERRUPTION OCCURS
If the clock shows "0:00" and blinks
all the timer settings have been
erased.
Reset the clock
time and the timer settings.
If the clock still shows the correct time but the dots blink
the power has been interrupted for less than 30 seconds,
and the timer programmes are retained in the memory.
To stop the dots' blinking, press the CLOCK button.
Advertisement
Table of Contents
