Specifications - Shure SLX-D Manual

SLXD4 DIGITAL WIRELESS RECEIVER

SPECIFICATIONS

(SUBJECT TO CHANGE)
Dimensions
1.65 × 7.76 × 5.98 in
(H × W × D)
(42 × 197 × 152 mm)
1.8 lb (816 g)
Weight
without antennas
Housing
Galvanized Steel
Power Requirements 15 VDC @ 600 mA
Supplied by external power supply
(tip positive)
RF INPUT
>75 dB
Spurious Rejection
Typical
Connector Type
BNC
Impedance
50 Ω
AUDIO OUTPUT
Gain Adjustment Range
–18 to +42 dB in 1 dB steps
1/4" (6.35 mm): Balanced
(Tip=audio +, Ring=audio –,
Sleeve=ground)
Configuration
XLR: Balanced
(1=ground, 2=audio +, 3=audio –)
1/4" (6.35 mm): 1.3 kΩ (670 Ω
Unbalanced)
Impedance
XLR (line): 400 Ω (200 Ω Unbalanced)
XLR (mic): 150 Ω
1/4" (6.35 mm): +15 dBV differentially
(+9 dBV single)
Full Scale Output
XLR (LINE setting): +15 dBV
XLR (MIC setting): –15 dBV
Mic/Line Switch 30 dB pad
Phantom 1/4" (6.35 mm): Yes
Power Protection XLR: Yes
NETWORKING
Network Interface Single Port Ethernet 10/100 Mbps
Network
DHCP or Manual IP address
Addressing Capability
Maximum Cable Length
100 m (328 ft)
receiver 1
IR
www.shure.com
© 2020 Shure Incorporated
OVERVIEW
SLX-D Digital Wireless delivers transparent, 24-bit digital audio and rock solid RF performance with easy
setup and rechargeability options in a suite of versatile wireless system configurations. Featuring industry-
leading digital wireless technology and design, the SLXD4 easily syncs wireless transmitters. A variety of
interchangeable vocal microphone choices guarantees the right solution for a wide range of applications, from
day-long conference to nighttime performances.
FEATURES
• Transparent 24-bit digital audio
• Extended 20 Hz to 20 kHz frequency range (microphone dependent)
• 120 dB dynamic range
• Digital predictive switching diversity
• 44 MHz tuning bandwidth (region dependent)
• 32 available channels per frequency band (region dependent)
• Up to 10 compatible systems per 6MHz TV band; 12 systems per 8 MHz band
• Easy pairing of transmitters and receivers over scan and IR sync
• Rugged metal construction
IR
SLXD4
Front Panel
antenna B
exit
push —
sync
SLXD4
Back Panel
exit
push —
sync
receiver 2
antenna A
inst / aux
exit
push —
sync