Important information
• Charge the appliance correctly according to these Operating
Instructions. (See page 7 "How to charge".)
• This appliance contains battery that is only replaceable by
skilled persons.
• Please contact an authorized service centre for the details of repair.
Parts identification (Fig. 1)
A Main body
1 Protective cap
2 System outer foil
Water inlets
4 Cleaning shutter
Foil frame release buttons
Finger rest
Power switch
To turn the shaver on
and off and also lock and
unlock the power switch.
Switch lock lamp (
)
Charge status lamp (
Appliance socket
Foil frame
System outer foil
release buttons
Outer foil section
Inner blades
Trimmer
Trimmer handle
B AC adaptor (RE7‑87)
Adaptor
Power plug
Cord
Appliance plug
Accessories
C Cleaning brush
D Oil
E Travel pouch
ES-ALT4B
F Operating Instructions
G Guarantee Card
)
How to charge
Plug in the AC adaptor into the main body and
the household outlet. (Fig. 2)
• Check that the charge status lamp (
It turns off after charging is completed.
• Charging is completed after approx. 1 hour.
• Recommended ambient temperature for charging is
10 °C – 35 °C. It may take longer to charge, or the charge
status lamp will blink quickly and the battery may fail to
charge properly in extremely high or low temperatures.
How to use
Note
The appliance will not operate with the AC adaptor
connected.
• Before shaving, check that the cleaning shutter is closed.
• Hold the power switch for 2 seconds or more to switch to
shaving foam mode.
• See Fig. 3 and Fig. 4 to lock or unlock the power switch.
Remove the cap and press the power switch.
► When the remaining battery is low
The charge status lamp blinks when the power is turned off.
(It turns off after 5 seconds.)
) is glowing.
7