Unpacking - Sony CDP-CE505 Operating Instructions Manual

Unpacking
Check that you received the following items:
• Audio connecting cord (1)
• Remote commander (remote) (except for CDP-
CE305, CDP-C250Z and CDP-C661) (1)
• Sony SUM-3 (NS) batteries (except for CDP-CE305,
CDP-C250Z and CDP-C661) (2)
Inserting batteries into the remote (except
for CDP-CE305, CDP-C250Z and CDP-C661)
You can control the player using the supplied remote.
Insert two R6 (size AA) batteries by matching the +
and" on the batteries. When using the remote, point it
at the remote sensor [] on the player.
"_° When to replace batteries
With normal use, the batteries should last for about six
months. When the remote no longer operates the player,
replace all the batteries with new ones.
Notes
• Do not leave the remote near an extremely hot or humid
pla_
• Do not drop any f(_reign object into the remote casing,
particularly when replacing the batteries.
• Do not expose the remote sensor to direct sunlight or
lighting apparatuses. Doing so may cause a malfunction.
• If you don't use the remote for an extended period of time,
remove the batteries to avoid possible damage from battery
leakage and corrosion.
Hooking Up the System
Overview
This section describes how to hook up the CD player to
an amplifier. Be sure to turn off the power of each
component before making the connections.
CD player
J '
Une output Une output
(R)
(L) To an AC outlet
Audio input
(R)
Audio input
(L) Amplifier
: Signal flow To an AC outlet
What cordswill I need?
Audio cord(suppLied) ( 1)
White _ _ White
_- (L) (L)
Red Red
(R) (R)
4