Sony CDP-CE505 Operating Instructions Manual page 15

2 Press the number button corresponding to the
fading time you want (2-10).
Fading out at the specified time
(Time Fade)
(except for CDP-C450Z, CDP-C350Z and
CDP-C250Z)
You can have the player fade out automatically by
specifying the playing time. Once you set the Time
Fade, it works twice, that is, the play fades out at the
end of both sides of a tape.
1
Press EDIT/TIME FADE repeatedly before you
start playing until _ and "A" in the ___
indication appear in the
display.
2
Press I<_ or l>l>4 to specify the playing time.
Each time you press these buttons, the display
changes as shown below, with the playing time of
one side following each indication.
F C-46 _ C-$4 _-_ C-60 ,_-_ C-74 _ C-90 _ - -. - - -'_
(23.00) (27.00) (30.00) (37.00) (45.00) /
3
4
Press _ to start playing.
At the specified time the play fades out and the
player pauses. "B" in the ___ indication appears
in the display.
To record on side B, reverse the tape and press 1_
or II on the player to resume playing.
Again, the play fades out at the specified time.
To cancel Time Fade
Press EDIT/TIME FADE.
,am-
"_'You can freely spedfy the playing time
See_'Youcanfreexlyspecify the tapelength" on page 14.
Adjusting the Recording Level
(Peak Search)
(except for CDP-C450Z, CDP-
C350Z and CDP-C250Z)
The player locates the highest level among the tracks to
be recorded to let you adjust the recording level before
you start recording.
PEAKSEARCH •
®1 '
0 Qc_€_ _o,=. , - ....... _o a"
1
Before you start playing, press PEAK SEARCH.
"PEAK" flashes in the display and the player
repeats the portion of the highest level.
2 Adjust the recording level o_the deck.
3 Press • on the player to stop Peak Search.
"PEAK" disappears from the display.
Notes
• The portion with the highestlevel may differ every time
you try the adjustment on the same disc. The difference is,
however, so slight that you won't find any problem in
adjusting the recording level precisely.
• Peak Search does not operate while you open the disc tray
by pressing EXCHANGE.
"_" You discsduring Time Fade
can
change
If the play ends before the specified fade-out time, (for
example, when you record CD-singles on a tape) change
the disc. The specified fade-out time is counted only
during playing.
_'(_ You fade in to resume playing in Step 4
can
•, After you reverse the tape, press FADER.
Note
If you press _ or _ during Time Fade, T'mne Fade will be
cancelled.
15