Sony Professional U-matic SP BVU-950 Maintenance Manual page 118

6-6-4.
Tool: Thickness gauge
Mode: PLAY mode with a cassette tape
Check procedure:
(1)
Insert a cassette tape and put the unit
into the PLAY mode.
(2) Cheek that the clearance between Pinch
(3)
Press Levers A and B meets the required
specification.
Repeat the
modes two or three times and check as
unthreading and_ threading
described in step (2).
Adjustment procedure:
(1)
(2)
Open the RP-30 Board after removing the
two fixing screws.
Put the unit into the PLAY mode. Adjust
the the Pinch Solenoid
Block flatblade
(3 mm meet
position of
screwdriver
the
with a
dia.) to
specification.
required
(3) Perfom the check procedures.
Pinch Solenoid Block Position Adjustment
flatblade screwdriver (3mm dia.)
ie Solenoid Block
fixing screw
Pinch Press Lever B
Pinch Press Lever B
Pinch Press Lever A
@
Pinch Press Lever A
Spec.:
0.2mm < @) < 0.5mm
6-20