Panasonic CQ-DF402U Operating Instructions Manual page 22

8 Orem
Installation Guide (continued)
O Installation Procedures
First complete the electrical connections, and
then check them for correctness. (= pages
25, 26)
Insert mounting collar (© into the dashboard, and
bend the mounting tabs out with a screwdriver.
Make sure that the lock lever (x) is flush with the
mounting collar © (not projecting outward).
Lock lever (x)
A Lock lever (x)
Mounting tabs
© Mounting bolt
Secure the rear of the unit.
After fixing mounting bolt © and power connector
©, fix the rear of the unit to the car body by either
method (a) or (b) shown below.
insert trim plate ©.
(ay) After installation, reconnect the negative © bat-
tery terminal.
G
4
(b) Using the rubber cushion (option)
(a) Using the rear support strap ©
Fire wall of car
@ Tapping screw / 3 mmo
| Rear support bracket
Rubber cushion (option) (provided on the car)
>N
© Hex. nut
© Rear support
strap
(5) Mounting bolt
(O Mounting collar
| CO-D6402/DEX302U |
T © Mounting bolt
®© Mounting collar