Timer Recording - Panasonic Omnivison VCRplus+ PV-V4611 Operating Instructions Manual

Timer Recording
B
©
m
co co
OCDCD
CO CO CO
CD CO co5
POWER
SELECT/
SET
A: PLAY
▼:STOP
◄:REW
► :FF
PROG/
Ready Check List
□ All connections made (pg. 8, 10, 22).
□ TV and VCR plugged in and turned on.
□ VCR/TV selector set to "VCR."
□ Clock set correctly.
□ Tape has rec. tab (pg. 4).
□ Remote in VCR mode. (Press VCR)
I
Press PR0G/VCR+*
to display PROGRAM.
PAUSE/_
SLOW
rvCRPItiS* J►PROG.
(DATE START STOP
.13 SAT -
TODAY
SELECT; a T 4 ►
(rvCRPK** PPROG t
hDATE START STOP
SELECT START DATE
Example ^-8-9.
31—1—2 6—^
Today — 7 SELECTA/T selection Order OAll'
L
WEEKLY WEEKLY WEEKLY
_J
{SAT) ' (MON) (SUN)
• If you are using a Cable Box, VCR
Timer Programming
Channel(Step 3) must be set to
the Cable Box output channel
AND your Cable Box must be
manually set to the desired
channel. The Cable Box power
left on.
• If a power interruption occurs
while programming the timer, the
timer program(s) may be canceled.
If "TIMER PROGRAMS WERE LOST
DUE TO POWER INTERRUPTION"
appears on-screen, please reenter
the timer programs.
Press ▼
to display Program
screen.
1) To set record DATE,
press at to select:
1-31= one time, or
DAILY= MON- FRI, or
WEEKLY= same time
each week
and press ► to set.
• See selection order
below left.
2) To set remaining
items, press
AT
to
select and press ► to
set START/ STOP times,
CH(channel) or LINE
input (pg.28), and tape
speed (SP, LP, SLR).
Press PROG/VCR+
to end program.
To Enter More Programs,
press
at
to select and
press ► to set an unused
program number and
repeat step 3.
Or
Press PROG/VCR+ again
to exit.
Press POWER off
to set the timer.
('TIMER" lights on Multi Function Display.)
|)~ VCR Plus* fPROG. fT»ST^
IF DT START STOP CH SPQ
CANCEL : ADD/OLT
SELECT : a t SET:»
EXIT : PROG_
For assistance, please call : 1-800-211 -PANA(7262) or send e-mail to : consumerproducts@panasonic.com