Samsung NX60 83 S Series User Manual page 89

To delay starting a self-cleaning cycle
1. Repeat steps 1 and 2 from the column on the left.
2. Press Demorar Inicio (Delay Start). The oven door locks.
3. Set the time you want the oven to start self-cleaning using the number pad.
4. Press Inicio/Ajustes (START/SET). The oven will start self-cleaning at your
specified time.
To cancel the self-cleaning cycle
You may find it necessary to stop or interrupt a self-cleaning cycle due to smoke
in the oven. To turn off the self-cleaning cycle, press Apagar/Borrar (OFF/CLEAR).
The cycle turns off, but the door remains locked and the Lock icon blinks until the
oven temperature falls below 205 °C (400 °F).
DG68-01327A-02_IB(FULL)_NX60A8315SS_AX_MES+EN.indb 39 DG68-01327A-02_IB(FULL)_NX60A8315SS_AX_MES+EN.indb 39
NOTE
Make sure all surface burners are off while
the oven is performing a self cleaning
cycle. Self-clean will not operate if a surface
burner is on.
3
2
After self-cleaning
• The door stays locked until the internal oven temperature falls below
205 °C (400 °F).
• When the oven has cooled down, wipe the oven surfaces with a cloth to remove
ash residue.
• Stubborn stains can be removed using a steel-wool pad. Lime deposits can be
removed using a vinegar-soaking cloth.
• If you are not satisfied with the cleaning results, repeat the cycle. "HOT" appears
on the display until the oven cools down. Wait until the message disappears, and
then start a new cycle.
4 • The cooling fan automatically runs for certain amount of time after self-cleaning.
• Self-cleaning does not operate within 2 hours after running the self-cleaning
cycle.
CAUTION
Do not attempt to open the oven door immediately after the self-cleaning cycle is
complete. The oven is still very hot when the door unlocks. Escaping hot air and/or
steam could burn you.
English 39
2023-10-30 오후 2:14:56 2023-10-30 오후 2:14:56