Advertisement
Cor eTal dale mUrciiare mavlelel- maleic
If the camera bracket is fastened directly to the
1 Enlarge the five holes in the vehicle body to
vehicle body, noise may appear in the picture on
between 10.2 mm and 10.5 mm in diameter.
the monitor. In this case the camera bracket should
be mounted so that it is not in direct contact with
2 Insert the supplied rubber nuts into these holes.
the vehicle body, using the supplied rubber nuts.
3 Using 5 mm hexagon head.bolts (ISO, 20 mm
long) and 5 mm washers, fasten to a torque of
5 to 6 kg per cm.
Camera bracket
5 mm |SO bolts
Rubber nuts (supplied)
(supplied)
Inside
Do not remove or even
loosen this screw.
Advertisement
