Cabinet Disassembly Instructions - Sylvania ZC320SL8 Service Manual

CABINET DISASSEMBLY INSTRUCTIONS

1. Disassembly Flowchart
This flowchart indicates the disassembly steps to gain
access to item(s) to be serviced. When reassembling,
follow the steps in reverse order. Bend, route, and
dress the cables as they were originally.
[1] Top Cover
[2] Front Assembly
[3] SW CBA
[4] DVD Mechanism &
DVD Main CBA Assembly
[5] Power Supply CBA
[6] Rear Panel
[7] AV CBA
[8] Front Bracket
2. Disassembly Method
ID/
Loc. Part
Fig.
No.
No.
[1] Top Cover D1 6(S-1)
Front
[2] D2
Assembly
[3] SW CBA D2 *2(L-3)
DVD
Mechanism
[4] & DVD Main D3
CBA
Assembly
Power
[5] D4 4(S-5), *CN1060
Supply CBA
[6] Rear Panel D5 (S-6), 6(S-7)
[7] AV CBA D5 5(S-8)
Front
[8] D5 (S-9)
Bracket
↓ ↓ ↓
(1) (2) (3)
Removal
Remove/*Unhook/
Unlock/Release/ Note
Unplug/Desolder
---
*5(L-1), *3(L-2),
*CN1061
---
4(S-3), (S-4),*CN101,
*CN701, Locking Card
---
Spacers,
M-PCB Plate Earth
---
---
---
---
↓
(4) (5)
Note:
(1) Identification (location) No. of parts in the figures
(2) Name of the part
(3) Figure Number for reference
(4) Identification of parts to be removed, unhooked,
unlocked, released, unplugged, unclamped, or
desoldered.
P = Spring, L = Locking Tab, S = Screw,
CN = Connector
* = Unhook, Unlock, Release, Unplug, or Desolder
e.g. 2(S-2) = two Screws (S-2),
2(L-2) = two Locking Tabs (L-2)
(5) Refer to "Reference Notes."
Reference Notes
1. CAUTION 1: Locking Tabs (L-1) and (L-2) are
fragile. Be careful not to break them.
[1] Top Cover
(S-1)
1
↓
1-5-1
(S-1)
(S-1)
Fig. D1
E7E2ADC