Other reasons why a cooking zone can switch itself o
All cooking zones can turn off themselves if liquid boils over and
lands on the control panel.
The automatic shutoff can also be activated if you place a damp
cloth on the control panel. In both of these instances, the appli-
ance will need to be switched on again using the main On/O
control
sensor after the liquid or the cloth has been removed .
RESIDUAL HEAT INDICATOR
When an individual cooking zone or the hob is turned off, the
presence of residual heat is shown with an
digital display of the appropriate cooking zones. Even after the
cooking zone has been switched off, the residual heat indicator
goes out only after the cooking zone has cooled.
You can use the residual heat for thawing or keeping food warm.
As long as the residual heat indicator is illuminated, there
WARNING
is a risk of burns.
If the power supply is interrupted, the
out and information about residual heat will no longer be
WARNING
available. However, it may still be possible to burn yourself.
This can be avoided by always taking care when near the
hob.
TEMPERATURE DETECTION
If
for any reason the temperatures on any of the cooking zones
were to exceed the safety levels, should this happen then the
cooking zone will automatically reduce to a lower power level.
When you have finished using the hob, the cooling fan will contin-
ue to run to cool down the hob electronics. The fan switches off
automatically when the electronics have reached a sufficiently low
temperature.
English - 22
(for "hot") in the
symbol will go