Related Manuals for Shark CI-4000
Summary of Contents for Shark CI-4000
- Page 1 User Manual SMART BATTERY CHARGER Model: SHARK CI-4000 AC Input: 220-240 V AC, 50-60 Hz,75 W DC Output: 12V DC, 2A/4A, or 6V DC, 2A Temperature Controlled...
- Page 2 DAMAGE TO DEVICE or PROPERTY This manual contains important information on the safe operation of this product. Your satisfaction with this SHARK charger and its safe operation is our ultimate concern. Therefore please take the time to read the entire manual, especially the Safety Precautions.
- Page 3 What’s Included • SHARK CI-4000 Battery Charger • Battery Clamp Connectors • Fuse (Extra) & Screws • User Manual RISK OF EXPLOSIVE GASES WORKING IN THE VICINITY OF A LEAD-ACID BATTERY IS DANGEROUS. BATTERIES GENERATE EXPLOSIVE GASES DURING NORMAL BATTERY OPERATION. FOR THIS REASON, IT IS OF UTMOST IMPORTANCE THAT YOU FOLLOW THE INSTRUCTIONS EACH TIME YOU USE THE CHARGER.
- Page 4 recommended rates of charge. 8) Clean battery terminals before connecting the charger. Be careful to keep corrosion from coming into contact with eyes. 9) For battery installed in a vehicle, first connect the positive (red) charger clamp to positive (+) terminal on the battery. Second, connect the negative charger clamp (black) to the vehicle’s chasis (away from the battery).
- Page 5 4) Connect and disconnect the clamps only after unplugging the charger from the electric outlet. 5) The use of any attachment not recommended or sold by the manufacturer 6) DO NOT overcharge batteries by selecting the wrong charge mode. 7) To reduce the risk of damage to electric plug and cord, pull by the plug rather than the cord when disconnecting the charger.
-
Page 6: Technical Specifications
ABOUT THE CI-4000 1. The CI-4000 charger is designed for charging of all types of 12V/6V lead-acid, and 12V lithium-ion batteries (LIFEPO4). 2. Built-in intelligent microprocessor makes charging faster, easier and safer. 3. This charger has safety features, including anti-spark protection, protection for reverse polarity, short circuit, overcurrent, overcharge and overheat protection. -
Page 7: Lcd Display
LCD DISPLAY 12V battery Current “A” 6V battery Voltage “V” Clamp connection Battery Voltage / Battery Current abnormal / Alarm readout Standard lead-acid Battery charging battery indicator AGM battery High Cold Battery Faulty battery temp. weather repair mode mode mode Calcium (LiFePO4 - 12V lithium battery (CAL) - Page 8 CONNECTING TO THE BATTERY WHEN THE BATTERY IS IN THE VEHICLE 1) Plug the charger into a 230V AC outlet. Connect the charger outlet cord plug to the cord plug of the clamp connectors, or ring connectors. 2) Identify polarity of battery terminals. The positive battery terminal is typically marked by these letters or "+"...
- Page 9 CONNECTING TO THE BATTERY WHEN THE BATTERY IS OUTSIDE OF THE VEHICLE 1) Check polarity of battery terminals. POSITIVE (POS, P, +) battery terminals usually have a larger diameter than the NEGATIVE (NEG, N, -) terminals. 2) Connect the RED POSITIVE cable clamp or ring terminal to the POSITIVE terminal of the battery.
-
Page 10: Charging Modes
CHARGING MODES CI-4000 charger has 9 operational modes: Standby, 12V STD, 12V AGM, 12V CAL,12V LITHIUM (LIFEPO4), 6V STD, 6V AGM, 6VCAL, 12V-REPAIR. Do not operate the charger CAUTION: If you choose 12V Mode for 6V battery, the battery will be damaged! - Page 11 2 - 120 Charging 6V STD batteries. 6V COLD/AGM Charging 6V batteries below 10˚C or 2 - 120 6V AGM battery. 6V COLD/AGM 2 - 120 Charging 6V CAL batteries. 6V STD The following modes are advanced charging modes that require your full attention before selecting.
- Page 12 CHARGING MODES (CONTINUED) LCD DISPLAY Note If the ambient temperature is lower than 0˚ C, the charger will enter the Cold Weather charging mode automatically. If the ambient temperature is higher than 30˚ C, the charger will automatically enter the high temperature charging mode.
-
Page 13: Charging Steps
12V Battery Current “A” 6VBattery Voltage “V” Battery Voltage Clamp connection abnormal / Alarm / Battery Current readout Standard lead-acid Battery charging battery indicator AGM battery High Battery Cold Faulty battery temp. repair weather mode mode mode Calcium (LiFePO4 - 12V lithium battery battery (CAL) (4-Cell LiFePO4) CHARGING STEPS... -
Page 14: Troubleshooting
STEP 1: DIAGNOSIS Checks if battery has connection with the charger and also checks battery voltage. STEP 2: DESULFATION (if needed) If battery voltage is too low, charger automatically generates pulsing current for up to 10 minutes to remove sulfate deposits. STEP 3: ANALYZE (if needed) Checks if the battery voltage reaches minimum charging limit after desulfation;... - Page 15 Charging in 6V Restart the charger and choose the Mode(s) for 12V correct charging voltage. Battery Battery cannot store electric 1) Replace the battery with the new one energy 2) If REPAIR Mode has not be tried, try cannot it for recovery recovered in Repair Mode...
- Page 16 Do not return the unit to the place of purchase. If the problem persists, SHARK PROFESSIONAL ACCESSORIES will, at its option, authorize evaluation, repair or replacement of the defective part or component at a SHARK PROFESSIONAL ACCESSORIES Service Center.
- Page 17 Problems caused by parts that are not original parts. Limits of Implied Warranty and Consequential Damage SHARK PROFESSIONAL ACCESSORIES disclaims any obligation to cover any loss of time, use of this product, freight, or any incidental or consequential claim by anyone from using this product. THIS WARRANTY...
- Page 18 Official Distributor: Shark professional Accessories Address: Staroplzenecka 290, 326 00 Letkov Czech Republic E-mail: info@shark-accessories.eu Tel.: +420 378 21 21 21 Copyright © 2023 Shark Professional Accessories www.shark-accessories.eu...