Advertisement
Quick Links
Shark Battery Charger
User Guide
Model:
CB-750
AC Input:
220-240V AC, 50-60Hz, 0.25A
DC Output: 12V DC, 0.75A
6V DC, 0.75A
Please read and understand all important safety and operating instructions before using this
charger. In addition, please read and follow all battery and vehicle manufacturer's instructions
and cautionary markings.
1
Advertisement
Related Manuals for Shark CB-750
Summary of Contents for Shark CB-750
- Page 1 Shark Battery Charger User Guide Model: CB-750 AC Input: 220-240V AC, 50-60Hz, 0.25A DC Output: 12V DC, 0.75A 6V DC, 0.75A Please read and understand all important safety and operating instructions before using this charger. In addition, please read and follow all battery and vehicle manufacturer’s instructions...
-
Page 2: Important Safety Instructions
IMPORTANT SAFETY INSTRUCTIONS SAFETY PRECAUTIONS FOR WORKING IN THE VICINITY OF A BATTERY 1) Batteries generate explosive gases during normal operation. Use in well-ventilated area. 2) Consider having someone close enough or within the range of your voice to come to your aid when you work near a battery. - Page 3 ABOUT SHARK CB-750 1) The CB-750 is perfect for keeping all of your 12V and 6V lead-acid batteries in top condition, including WET (Flooded), GEL, MF (Maintenance-Free) and EFB (Enhanced Flooded Battery) . 2) Built-in intelligent microprocessor makes charging and maintaining faster, easier and safer.
-
Page 4: Connecting To The Battery
6) When disconnecting, disconnect in the reverse sequence, removing the negative first (or positive first for positive ground systems). 7) Follow these steps when using 12V accessory plug (CB-750 does not have this accessory): keep the vehicle hood open. Connect the end of the 12V accessory plug to the charger; insert the 12V accessory plug into the vehicle’s 12V outlet. -
Page 5: Charging Modes
Charging and Maintaining 6V WET/GEL/MF/EFB batteries (Green LED) NOTICE: Make sure your battery to be charged / maintained is in good condition. The CB-750 cannot be used to recover severely discharged batteries or dead batteries. How to deal with the batteries which are deeply discharged, but in good condition? 1. - Page 6 LED COMMUNICATION OF ABNORMAL RESULTS LIGHT(S) CAUSE(S) SOLUTION(S) CONDITION Exchange the red and black Solid Red Warning! clamps or ring terminals to the Reverse Polarity correct battery posts 1) Connect the red and black clamps or ring terminals to 1) Open-circuit the battery posts 2) Dirty Battery Posts 2) Clean the battery posts...
-
Page 7: Warranty
Red Warning! LED Battery cannot be Replace with a new battery light flashes 2x stop recovered through for 3secs, 2x stop Desulphation Process for 3 secs… WARRANTY 1) This product is warranted to the original purchaser for a period of two (2) years from the original shipping date, to be free of defects in material and workmanship.