Sony TRINITRON KV-SZ252M50 Service Manual page 96

D Getting Started
Select Confirm
Step 1
Insert the batteries (supplied) into the remote.
• Do not use old or different types of batteries together.
Step 2
Connect the antenna cable (not supplied) to 8
(antenna input) at the rear of the TV.
• Your TV can receive both TV and FM radio signals from
the appropriate connections through the 8 (antenna
input) terminal (KV-SZ292N60/SZ252N60 only) (see F).
• You can also connect your TV to other optional
components (see F).
Step 3
Plug in the power cord, then press 1 on the TV to turn
it on.
• The 1 (standby) indicator flashes green for a few seconds
when turning on the TV. This does not indicate a
malfunction.
Step 4
Set up the TV by following the instructions of the
"Initial Setup" menu (see E).
End