Setup" Setting - Sony TRINITRON KV-SZ252M50 Service Manual

x "Setup" setting
Press WEGA GATE and select "Settings".
Press V or v to select the "Setup" icon ( ),
then press
"Language"
"Picture Position"
"Video Label"
"Color System"
"Factory Settings"
GB
16
.
Change the menu language.
Press V or v to select either "English" or "
press .
Adjust the picture position when it is not aligned with the TV
screen.
Press V or v to select "Picture Rotation" or "Picture V-Position",
then press
Press V,v,B or b to adjust the picture position, then press
Label the connected equipment.
(1) Select "Video Input" and press
input you want to label, then press
(2) Select "Label" and press
the label options: "Video 1"/"Video 2" / "DVD"
(KV-SZ292M88/SZ292M81/SZ292M80/SZ252M81/
SZ252M80 only), "VCR", "SAT", "Game" or "Edit"*.
* You may edit the video label to your favorite name. Press V or v
to select alphanumeric characters for the label, then press
Select the color system.
Press V or v to select either "Auto", "PAL", "SECAM",
"NTSC3.58" or "NTSC4.43", then press
"Auto".
Reset your TV to factory settings.
Press and press V or v to select "Yes". Then press
Your TV will go blank for a few seconds, then the "Initial Setup"
menu will appear.
To cancel, select "No", then press
.
, then press V or v to select
Setup
Language:
English
Picture Position
Video Label
Color System: Auto
Factory Settings
Select Confirm
" (Arabic), then
. Press V or v to select the
.
. Normally, set this to
.
.
End
.
.