Sony TRINITRON KV-SZ252M50 Service Manual page 104

J "Picture" setting
Press WEGA GATE and select "Settings".
Make sure the "Picture" icon (
then press
"Picture Mode"
"Color Temperature"
"VM"
(Velocity Modulation)
"Intelligent Picture"
"Signal Level Indicator"
* You can adjust the setting to your personal preference in the "Picture Adjustment",
"Color Temperature" and "VM" options only when the "Custom" mode is selected.
.
Choose either "Vivid" (bright, contrast and sharp),
"Standard" (normal) or "Custom"*.
Adjust white color tint.
Choose either "Cool" (blue tint), "Neutral" (neutral tint) or
"Warm" (red tint).
Sharpen the edges of each object.
Choose either "High", "Low" or "Off".
Optimize picture quality.
Press V or v to select "On", then press
To cancel, select "Off", then press
Display the signal level when the "Intelligent Picture" is
functioning.
"Intelligent Picture Signal Level" indicator will be displayed,
followed by picture improvement when you change the
program number or the input mode.
red
(weak) (average)(fair ................. good)
Press V or v to select "On", then press
To cancel, select "Off", then press
still functioning.
) is selected,
amber green
Picture
Picture Mode: Vivid
Picture Adjustment
Color Temperature: Cool
VM: High
Intelligent Picture: On
Signal Level Indicator:
Select Confirm End
.
.
.
. "Intelligent Picture" is
On