Table of Contents
Advertisement
Using the preview
function
Press INFO to scan the channels you previously programmed into the
TV's memory (see "Adding channels to the TV's memory" on page
23). A 6-picture multi-window scan will start.
To cancel the preview function:
Press INFO again.
Using the favorite
function
1. Press FAVORITE to scan the channels you previously
programmed into the TV's memory (see "Programming your
favorite channels" on page 25).
A 9-picture multi-window
scan will start.
The first window will display as a moving picture.
2. Press • • • I_ to select the channel you want to watch. The
selected channel will display as a moving picture in the 9-picture
multi-window.
3. Press ENTER to display the channel you selected in step 2 as a
normal picture.
"@a
_v--_,
i¸
\,\
K_;/
"faille_ __$ '=
t_
Each time you press FAVORITE, the display will change in the
following order:
FAVORITE CH1--
FAVORITE CH2 -- Off
To cancel the favorite function:
Press FAVORITE again.
Using
the strobe
function
Press MULTI to start the strobe function. A 9-picture multi-window
strobe starts for the current main picture.
k4&o
For example, you can strobe the action of the TV program you are
watching, or view a decisive moment of a sports program that was
previously recorded.
To cancel the strobe function:
Press MULTI again.
Note:
INFO
FAVORITE
ENTER
MULTI
A program or channelyou set up as
blocked in the Locks menu may not always
displayas blocked during INFO (preview)
or FAVORITEmulti-window scanning.
When blocked properly, the program will
appear as a black window with an "X"
under the channel numbe_
Thepreview (INFO) function does not
work when ANT2 mode is selected.
TheINFO (preview), FAVORITE,and
MULTI (strobe) functions do not work
when the main picture source is
ColorStream.
30
32/36AFX61(_
Advertisement
Table of Contents
