Verifying The Device Code (990); Using The Volume Lock Feature (993); Operational Feature Reset (980) - Toshiba ColorStream 32AFX61 Owner's Manual

Verifying the device code (9903
Use this feature to verify the codes for your other electronic devices.
The number of blinks after pressing the 1, 2, 3, and 4 buttons is the
4-digit code set up for that mode.
For example, to verify the device code of the VCR mode:
1. Repeatedly press MODE to select VCR mode.
2. While holding down RECALL, press 9-9-0.
3. Press 1 _ 2 blinks.
4. Press 2 _ 3 blinks.
5. Press 3 _ 4 blinks.
6. Press 4 _ 5 blinks.
This verifies that the device code of the VCR mode is "2345."
Using
the Volume Lock feature (993)
For the TV, CABLE/SAT, VCR, and DVD modes, the volume
controls (VOL A! and MUTE) can be programmed (locked) to the
selected device mode. This feature does not apply to the AUDIO 1/2
modes.
For example, to lock the volume controls to always jump to the
CABLE/SAT mode:
1. Repeatedly press MODE to select the CABLE/SAT mode.
2. While holding down RECALL, press 9-9-3.
3. Press VOL A. The Mode indicator will blink two times (locked).
MODE
VOL • •
RECALL
The following table describes in more detail the Volume Lock
implementation.
TV
TV
CBL/SAT
VCR
DVD
AUD1
AUD2
CBL/SAT
TV
CBL/SAT
VCR
DVD
AUD1
VCR
TV
CBL/SAT
VCR
DVD
AUD 1
DVD AUD1 AUD2
TV AUD1 AUD2
CBL/SAT AUD1 AUD2
VCR AUD1 AUD2
DVD AUD1 AUD2
AUD 1 AUD 1 AUD 1
AUD2 AUD2 AUD2 AUD2 AUD2
To reset the volume controls to the original device code:
1. While holding down RECALL, press 9-9-3.
2. Press VOL !. The Mode indicator will blink four times
(unlocked).
Operational feature Reset (980)
This feature clears all setup features not related to "Device code set
up" and resets the Volume Lock to "TV."
To reset the features:
While holding down RECALL, press 9-8-0.
The Mode indicator will blink two times, and then pause and
blink two more times.
32/36AFX61 (E]
1 5