Table of Contents
Advertisement
Learning about the remote control
Only the buttons used for operating the TV are described here.
POWER turns the TV on and off.
SLEEPallows access to the automatic TV shut-off function (page 41).
LIGHTThe first press of the LIGHT button lights the keypad and turns
on the Illumination mode. With the Illumination mode on, pressing any
other key lights the keypad for 5 seconds (10 seconds if the remote
control is in programming mode). Subsequent presses of the LIGHT
button toggle the Illumination mode on and off.
ChannelNumbers (0-9, leO) allow direct access to channels (page 24).
MODEcycles through the six device modes (l-V, CABLE/SAT, VCR,
DVD, AUDIO 1, AUDIO2). The mode indicator will remain lit for
10 seconds.
FAVORITE allows access to the multi-window feature (page 30).
INFO allows access to multi-window feature (page 30).
MENU allows access to on-screen programming menus (page 21).
ENTER sets programming menu information (page 21).
ill' < i_ Buttonsselect or adjust programming menus (page 21).
(FAV3 < _"Buttons select your favorite channels (page 25).
VOL iV adjusts the volume level.
EXITexits programming menus (page 21).
CHiV cycles through programmed channels (page 24).
CHRTN returns to the last viewed channel (page 25).
TV/VCRtoggles between TV and VCR modes.
RECALL displays on-screen information(page 46).
MUTEmutes the sound (page 42).
INPUT selects the video input source (page 39).
PIPButtons allow access to PiP functions (page 28).
PIP turns the PiP on and off.
PIPCHAV selects the PIP channel.
MULTIallows access to the multi-window feature.
STILLfreezes the PIP picture.
SWAPswitches the main and PIP pictures.
LOCATE changes the position of the PIP picture.
SOURCEsdects the PIP signal input source.
20
32/36AFX61(£)
Advertisement
Table of Contents
