Record On A Tape (Main Operation, One Touch Record, Channel Selection, Select Input Mode) - Panasonic Omnivision PV-7661 Operating Instructions Manual

@© Record On a Tape
[:] Alicsnnsctons'aia made * VCR power comes on automatically.
(See pages 6-9.)
O VCR is Plugged in.
[] TV is turned on and set to the VCR
channel (CH3 or CH4).
Push CH A/V or CHO2
NUMBERED keys to
select a channel.
- * Or, push CHANNEL A/V
on the VCR.
Holding down CH A/Y
will increase the
channel search speed.
To record from an outside
source, push CH A/¥ or INPUT
to select "LINE1" or "LINE2" (see page 21).
«Trick y -
Multi Function
Display
Push SPEED to change
the recording speed. SLP
« SP = Standard Play
LP = Long Play
SLP = Super Long Play
(See page 5.)
- Push REC/TIME on the remote
control or VCR to start recording.
* To edit out unwanted portions, push PAUSE to
. A pause the recording in progress.
To release, push PAUSE again.
(After the VCR has been in Pause mode for 5
minutes, it will stop automatically to protect the
tape and video head.)
One Touch Timer Recording (OTR)
The VCR starts recording and turns itself off at a preset time.
In step 4, push REC/TIME repeatedly to set the length of the
recording. Each push will change the stop time as shown.
C Normal Rec —»0:30 — 1 ")
4:004— 3:00 4— 2:00 4— 1:30
* "TIMER?" lights in the Multi Function Display.
* The remaining recording time can be displayed by pushing
DISPLAY in OTR mode.
Push STOP to
(stor) stop recording.
* Or, push STOP/EJECT on the VCR.
20