Playback A Tape (Main Operation, Special Effects, Quality Picture Features) - Panasonic Omnivision PV-7661 Operating Instructions Manual

Hide thumbs Also See for Omnivision PV-7661:
Table of Contents

Advertisement

Playback a Tape
A check list before you begin.
O All connections are made.
(See pages 6-9.)
O TV and VCR are plugged in.
[O TV is turned on and set to the VCR
channel (CH 3 or 4).
TRACKING/
Multi
FF/REW
V-LOCK
Function
Search
Display
Caution:
Please inspect your cassette tapes for
any loose or peeling labets as they
may become jammed in your unit.
———_——-.__
Insert a cassette.
ooh
+ VCR power comes on automatically.
Push PLAY on the remote or VCR
D
to start playback.
* Playback begins automatically if cassette has no record tab.
Push STOP on the remote or VCR
&
a
to stop playback,
see;
PUSH STOP/EJECT on the VCR
to eject the cassette.
* You may eject a cassette with power on or off.
To Find a Particular Scene During Playback
Push REW or FF during playback
(we)
or ED
to search for a scene.
Ene)
e>
* Search speed for SP mode tapes is 9 times and
SLP mode tapes 27 times the normal speed.
* Some noise bars will appear during search,
Special Effects During Playback
These features work best in SP or SLP mode. The sound will be muted.
Slow Motion
PI
Push SLOW to start slow motion playback.
Push PLAY or SLOW to release.
Still (Freeze)
Frame
Picture
Push PAUSE to freeze and release the picture.
* To reduce picture noise, first push SLOW. Then, use CH (TRACKING)
A/V to clear up the picture, then push PAUSE.
Frame by Frame Advance
in Still mode, hold down SLOW to advance the still picture one
frame at a time. Push PAUSE to release.
Features for a Quality Picture
Digital Auto Picture
This feature automatically controls the video output signal for less
noise depending on the tape condition.
Digital
Auto Trackin
This feature continuously analyzes the signal and adjusts for optimum
picture quality.
Manual
Tracking
Control (to reduce
re nois
Use during
Playback and Slow Motion mode to reduce picture noise.
Push CH a
To return to Auto Tracking mode, push POWER off and then on again.
V-Lock Control (to reduce picture jitter)
In Still mode, CH (TRACKING) A/Y operate as a V-Lock control.
Push A/Y until the picture is stabilized.
ora
* After the VCR is in Still or Slow mode for 3 minutes, it will switch to
the Stop mode automatically to protect the tape and the video head.
19
LEE
ME during playback until the picture clears up.
0
fo
2,
O
e)
po]
0
X
9)
"t.
o
-

Advertisement

Table of Contents
loading

Table of Contents