Regulation Markings - TEFAL SEB Tasty Nutrition Manual

Regulation markings

Manufacturer's identification or
trademark.
Year of manufacture, Equipment
identification / model reference.
Max. operating pressure
EN
Max. safety pressure.
Capacity.
SEB/Tefal answers your questions
Problems
If you cannot close the lid: Check that the Open/Close handle is in the vertical
If the NutriCook has
heated up under pressure
with no liquid inside:
If the pressure indicator
did not rise and nothing
escapes from the valve
during cooking:
If the pressure indicator
has risen but still nothing
escapes from the valve
during cooking:
63
Marking
position.
Check the way up the seal is fitted, see the "Cleaning
and Maintenance" heading.
Have your NutriCook inspected by a SEB/Tefal
Approved Service Centre.
Check that:
- The cooking program selector is set to one of the
cooking programmes.
- Your NutriCook is properly closed.
This is normal for the first few minutes.
If the problem persists, select the
for the pressure indicator to drop then move the
Open/Close handle to the vertical position.
Clean the operating valve and steam release outlet
under running water and check that the safety valve
moves: Fig 17. See the "Cleaning and Maintenance"
heading.
Decorative crown.
On the top of a jaw, visible when the cover is
in the "Open" position.
On the control module, when the module is
removed from the lid.
On the outside of the NutriCook pan.
Recommendations
OK
Location
NO
programme. Wait