Disassembly - JVC NX-DV3 Service Manual

Compact component md system

Hide thumbs Also See for NX-DV3:

3.1

Main body section

3.1.1 Removing the metal cover

(See Figs.1 to 3)

(1) From the both sides of the main body, remove the four

screws A attaching the metal cover. (See Figs.1 and 2)

(2) From the back side of the main body, remove the two

screws B attaching the metal cover to the rear cover. (See

Fig.3)

(3) Take out the metal cover.

3.1.2 Removing the rear panel

(See Fig.4)

• Prior to performing the following procedure, remove the metal

cover.

(1) From the back side of the main body, remove the thirteen

screws C and screw D attaching the rear panel.

(2) Release the two joints a, and take out the rear panel.

1-8 (No.MB351)

SECTION 3

DISASSEMBLY

Metal cover

Joint a

Fig.1

Fig.2

Fig.3

Rear panel

Fig.4

Metal cover

Joint a