Table of Contents
Advertisement
(Continued)
At the start of the DIGA, Player theater, or RAM theater playback,
the TV's input automatically
switches to the input
based on the playback equipment.
® For the RAM theater, the speakers
automatically
switch to the theater system.
If using the DIGA operation,
the TV's input automatically
switches to the DIGA and DIGA menu is displayed.
When "Yes" is selected (p. 31), TV is turned on automatically
and switches to the appropriate
HDMI input whenever
VlERA Link compatible
equipment
is initially turned on and Play mode is selected.
When "Yes" is selected (p. 31) and the TV is turned off, all connected
VlERA
Link compatible
equipment
is also
automatically
turned off.
® DIGA (Panasonic
DVD Recorder) will not turn off if it is still in rec mode.
Caution:
The TV remains on even if the VlERA Link compatible
equipment
is turned off.
® Condition
Power off link: Yes, Stand-by power save: Yes
The equipment
has "HDAVl Control 4 (with quick start mode)" connected
with HDMI cable.
When TV is turned off, all connected
VlERA Link compatible
equipment is moved to ECO standby mode*
automatically
under above conditions.
* Minimum
power consumption
of standby condition for the equipment.
® Condition
Auto power stand-by: Yes,
The equipment
has "HDAVI Control 2 or later" (for available equipment
only) connected
with HDMI cable.
[ Examples of timing for operation ]
• When the input is switched from HDMI.
• When the "Speaker
output" is changed from "Home theater" to "TV".
The connected
VlERA Link compatible
equipment will be turned off automatically
when not in use.
"TV" is the default setting. To set the Home Theater system as default speakers,
change the default speakers
setting from "TV" to "Theater".
Sound will be output from the Home Theater whenever
the TV is powered on.
If the "ONE TOUCH PLAY" key is pressed on the remote control for Panasonic
Home Theater system, the following
sequence
of operations
is performed automatically.
q12 Home Theater power switches On, and playback
begins.
(27TV power switches On, and the playback
screen is displayed.
(3_Audio is muted on the TV and switches to the theater system.
The following
information
about the TV settings can be transmitted
to each piece of equipment
(Recorder/Home
theater/Player)
that has "HDAVl Control 3 or later" function connected
to a TV with HDMI cable.
Transmittable
data
Recorder
Home theater
Player
_i_ On Screen Display Language
setting
O
O
O
(English/ Espa t_ol/F ra n(:;ais)
_2) Panel Aspect Ratio
(1 6:9 fixed)
O
O
O
_39Closed caption information
(Mode/CC type/Digital
setting)
O
......
_4_Channel information
(Input signal/Channel
list/Caption
information)
O
......
® There is a possibility that all the GUI language information
might be set from equipment that has HDMI CEC
function connected
to TV with HDMI cable. Depending
on operating
conditions
or the specification
for each piece
of equipment the setting may or may not be applied.
® For more details on the external equipment's
operation,
please refer to the operating
manuals for the equipment.
[For Recorder]
® You cannot operate other functions while transmitting TV's information above except Power On/Off key operation.
When you turn off this unit, the transmission will be interrupted (only when you are transmitting _4_" Channel information).
Minimizes
lip-sync delays between the picture and audio when you connect to a Panasonic theater system or
Amplifier.
@
<
rlq
3>
EJ
<>
C)
©
m
35
Advertisement
Table of Contents
