Table of Contents
Advertisement
(Continued)
AdJustments/Configurations
(alternatives)
Sets the mode to select the channel with Channel
up/down
button
(All/Favorite/Digital
only/Analog
only)
÷ Favorite:
Only channels
registered
as FAVORITE
(p. 18)
Selects
the screen menu language
(p. 15)
[Language
]
Adjusts
the clock (p. 15)
[Clock
]
Sets channels
(p. 41)
[ANT/Cable setup
1
Selects
the terminal
and label of the external
equipment
(p. 43)
[Input labels
]
Controls
equipment
connected
to HDMI terminals
(p. 34) (On/Off)
[VlERA
Link
_]
÷ "Power off link", "Power
on link",
and "Default
speakers"
cannot
be selected
if "Off" is set.
Sets "Power on link" of HDMI connection
equipment
(p. 34) (Yes/No)
Sets "Power off link" of HDMI connection
equipment
(p. 34) (Yes/No)
Set "Stand-by
power save" of HDMI connection
equipment.
(p. 34) (No/Yes)
Set "Auto power stand-by"
of HDMI connection
equipment.
(p. 34)
(No/Yes
(with
reminder)/Yes
(no reminder)
Selects
the default speakers
(p. 34) (TV/Theater)
Reduces
screen
brightness
to lower power consumption.
Eye-friendly
for viewing
in a dark
room.
[Power
save
_]
(Standard/Saving)
To conserve
energy, the TV automatically
turns off when NO SIGNAL
and NO OPERATION
is performed
for more than 10 minutes.
(Enable/Disable)
Note
÷ Not in use when setting
"Auto power on", "On/Off Timer",
"Lock", "SD mode" or Digital channel.
÷ "No signal for 10 minutes
was activated"
will be displayed
for about 10 seconds
when the TV is turned
on for the first time after turning
the power off by "No signal for 10 minutes".
÷ The on-screen display will flash 3, 2 and 1 to indicate the last three (3) remaining minutes prior to the shut-off.
To conserve
energy, the TV automatically
turns off when no operation
of remote
or side panel key
continues
for more than 3 hours.
(Enable/Disable)
.o,o
°ur ]
÷ Not in use when setting
"Auto power on", "On/Off Timer or PC input display.
÷ "No activity
for 3 hours was activated"
will be displayed
for about 10 seconds
when the TV is turned on
=
-
for the first time after turning the power off by "No activity for 3 hours".
÷ The on-screen display will flash 3, 2 and 1 to indicate the last three (3) remaining minutes prior to the shut-off.
Turns TV On automatically
when the cable box or a connected
device is turned On. (NoNes)
TV power cord must be plugged
into this device. TV comes
on every time the power is restored.
÷ The "Sleep"
timer, "On / Off timer", and "First time setup" will not function
if "Auto power on" is set. (p. 44)
Set "Thumbnail"
or "Slideshow"
to play back SD cards automatically.
(SlideshowlThumbnaillSetlaterlOff)
[PlaySDcar£utomatically
:i
Displays
TV version
and software
license.
About
Performing
Reset will clear all items set with Setup, such as channel
settings.
(p. 40)
Reset to defaults
]
@
,._. -r
"_o
E'_
Pc-
Adjustments/Configurations
(alternatives)
Sets the mode to select the channel with Channel
up/down
button
(All/Favorite/Digital
only/Analog
only)
Sets favorite
channels.
(p. 18)
Changes
the station
identifier.
(p. 41)
Checks
the signal strength
if interference
or freezing
occurs on a digital image.
(p. 41)
31
Advertisement
Table of Contents
