AirPlay setup
Use AirPlay to set up the Wi-Fi connection
of iOS device (iOS7 or later) and speaker.
1
home network
(xxxxxx)
→
device name displays in around 5
seconds.
Settings
Settings
Settings
→
Select the Play-Fi device in the
Airplay set up.
→
Press "Done" when set up
complete
→
After successful Wi-Fi connection,
the Wi-Fi light indicator will stop
pulsing and turn solid.
2
Return to Philips Sound App to name
the device.
Settings
Solid
3
After connection, you can change
names to choose from or create your
the end of the name list. Otherwise,
it follows the default name.
WPS mode
If your router has Wi-Fi Protected Setup
(WPS), you can set up the connection
without entering a password.
1
Press and hold
the
(Wi-Fi)
button for 3
seconds. You
will hear a tone
and the Wi-Fi
light will begin double blink.
2
Press the WPS button on your router.
this WPS logo.
3
After successful Wi-Fi connection,
the Wi-Fi light indicator will stop
pulsing and turn solid.
Note
•
WPS is not a standard feature on all routers.
If your router does not have WPS then use
Standard Wi-Fi Setup.
•
Press the
(Wi-Fi) button once if you want to
exit the WPS mode or it will automatically exit
after 2 minutes.
WPS
9