Connect; Connect To Wi-Fi (Wireless Operation) - Philips TAFS1/10 User Manual

4

Connect

Connect to Wi-Fi (Wireless
Operation)
(For iOS and Android version)
By connecting this unit and mobile
phones, tablets (such as iPad, iPhone,
iPod touch, Android phones, etc.) to the
same Wi-Fi network, you can then use
the Philips Sound app powered by DTS
Play-� to control the soundbar to listen
to audio �les.
1
Download and install the Philips
sound app powered by DTS play-� on
a phone or tablet.
Philips Sound
•
Make sure your router is turned on
and working properly.
Note
•
Depending on the device version, the operation
screen and the way to perform operations may
vary.
2
Connect your phone or tablet to the
same Wi-Fi network that you want to
connect your soundbar.
Wi-Fi
<
Wi-Fi
3
Press and hold
located at the back cabinet for 8
seconds to trigger the Wi-Fi
connection
5
→ Until the speaker make a second
tone and then release the button
6
7
4
Wait until the Wi-Fi light indicator on
the front cabinet goes from a fast blink
to a slow pulse. When it begins pulsing
slowly, it indicates that the speaker is
entering the Wi-Fi setup mode.
Fast blink
(Wi-Fi) button
5
8 sec
5
5
6
6
6
Return to this app to continue setup.
7
Ready?
Go To Wi-Fi Settings
Two tone
7
7
Wi-Fi Password
X
I
1234567890
Enter the password for the network Your Home Router
Show Password.
Slow pulse
5
Return to this app to contin Philips So
Return to
6
Ready?
Ready?
Go To Wi-Fi Settin
Go
Return to this app to continue setu
Return to this ap
Ready?
Ready?
Wi-Fi Password
7
Wi-F
Go To Wi-Fi Settings
Go To W
I
1234567890
12345678 PlayFi
Enter the password for the network Yo
Enter the passw
Show Password.
Show P
Wi-Fi Password
Wi-Fi Pas
I
1234567890
I
1234567890
Your Play-Fi
Enter the password for the network Your Home
Your
Enter the password for
Show Password.
When the Wi-Fi Show Passwo
blinking and be
setup and
7