Before First Use; Daily Use - Electrolux EW6F4943AP User Manual

Table of Contents

Advertisement

10.3 Operating Hours Counter
It is possible to visualise the total operating
time of the appliance in hours, starting from
the first switching on. This value will count
operating time of the cycles (does not include
pauses, delayed start time). To visualise this
value, proceed as follows:
1. Switch the appliance on by pressing
Marche/Arrêt button.
2. Turn the programme knob to the Eco
40-60 programme (1st position
clockwise).
3. Press and hold the Essorage and Temp.
buttons for some seconds (within 10
seconds after the switching on. After
these 10 seconds, the key combination
activates and deactivates the acoustic
signals).
4. After 3 seconds the total hours operated
by the appliance are shown in the display:
e.g. 1276 hours, the display shows the
text Hr for 2 seconds, 12 (thousands and
hundreds) for 2 seconds and 76 (tens and
units).
If the procedure does not work (due to
timeout, wrong programme dial position
or wrong keys combination), switch the
appliance off and repeat sequence from
the beginning.

11. BEFORE FIRST USE

1. Make sure that the electrical power is
available and the water tap is open.
2. Pour a small quantity of detergent into the
compartment marked by
3. Set and start a programme for cotton at
the highest temperature without any
laundry in the drum.

12. DAILY USE

WARNING!
Refer to Safety chapters.
10.4 Factory Reset
This function allows to restore the factory
default options. To activate this option follow
steps below:
1. Switch the appliance on by pressing
2. Turn the programme knob to the
3. Press and hold the Essorage and Temp.
4. The display will show
If the procedure does not work (due to
timeout, wrong programme dial position
or wrong keys combination), switch the
appliance off and repeat sequence from
the beginning.
This removes all possible dirt from the drum
and the tub.
.
12.1 Activating the appliance
1. Connect the mains plug to the mains
2. Open the water tap.
Marche/Arrêt button.
Synthétiques programme (3rd position
clockwise).
buttons for some seconds (within 10
seconds after the switching on. After
these 10 seconds, the key combination
activates and deactivates the acoustic
signals).
seconds.
socket.
for about 5
ENGLISH
21

Advertisement

Table of Contents
loading

Table of Contents