Adjusting The Shock Absorber Assembly - Yamaha XTZ07AR 2024 Owner's Manual

Instrument and control functions
Adjusting the shock absorber
assembly
This shock absorber assembly is
equipped with a spring preload adjust-
er and rebound and compression
damping force adjusters.
NOTICE
To avoid damaging the mechanism,
5
do not attempt to turn beyond the
maximum or minimum settings.
Spring preload
Turn the adjuster in direction (a) to in-
crease the spring preload.
Turn the adjuster in direction (b) to de-
crease the spring preload.
To set the spring preload, turn the ad-
juster in direction (b) until it stops, and
then count the clicks in direction (a).
EAUM4121
(b)
ECA10102
1. Spring preload adjusting knob
Spring preload setting:
Unit for adjustment:
Click
Minimum (soft):
0
Standard:
10
Maximum (hard):
24
TIP
 When turning the spring preload
adjuster in direction (b), the 0 click
position and the 1 click position
may be the same.
 When turning the spring preload
adjuster in direction (a), it may
click beyond the stated specifica-
(a)
Rebound damping force
1
Turn the adjuster in direction (a) to in-
crease the rebound damping force.
Turn the adjuster in direction (b) to de-
crease the rebound damping force.
To set the rebound damping force, turn
the adjuster in direction (a) until it
stops, and then count the clicks in di-
rection (b).
1. Rebound damping force adjusting screw
5-23
tions, however such adjustments
are ineffective and may damage
the suspension.
(a)
(b)
1