CrimeStopper SP-500 Installation Handbook page 21

20 PINK Wire function
Starter Cranking Time (Option
21
#16 is set to Timed Crank)
22 Diesel Glow Plug Delay
Remote Start Engine Run
23
Time
Smart Tachless Voltage
24
Adjustment 79-100%
25 Horn Pulse
26 Aux # 3
27 Aux # 3 Time : 1 to 255 sec.
28 Aux # 4
29 Aux # 4 Time : 1 to 255 sec.
Turbo Timer Mode
30
1 to 5 Minutes
31 Reset Options to default (*)
PROGRAMMABLE OPTION DESCRIPTIONS:
1. ENGINE MONITORING:
This option sets how the unit monitors your engine. You can program either for Tach mode in which the unit uses a
Tach signal (RPM) or for "Ultra-Smart" Tachless mode that monitors voltage level. See pages 16-18 for more
information and additional steps for actual Tach learning and Tach finder modes.
2. AUTOLOCK/UNLOCK W/IGNITION:
Controls whether the doors will automatically lock when the ignition is turned on and unlock when the ignition is
turned off. Doors will not lock if they are open to prevent locking the keys in.
OPTION PROGRAMMING TABLE
Passive Carjack
0.75 Sec.
10 Seconds
12 Minutes
-1%
Pulse With Trigger
(No Chirps)
Steady Momentary
-1 Second
Steady Momentary
-1 Second
Brake Pedal Set Mode
21
*Glow Plug*
*0.5 Sec.*
*Monitor Glow
20 Seconds
Plug
*24 Minutes* 36 Minutes
*Set to 93% for
1%
No Warn-A-Way *All Functions*
*Momentary*
+1 Second *Default 12 Sec.*
*Momentary*
+1 Second *Default 12 Sec.*
Idle Down Mode
*Always Set Mode*
*Reset All
Options*
1.0 Sec. 1.5 Sec.
30 Seconds
48 Minutes
default*
All Functions
Short Chirp
Timed Latch On/Off
Timed Latch On/Off