Shark NINJA COMBI SFP703CO Owner's Manual page 5

USING YOUR NINJA COMBI
Rice/Pasta
1
To get started, add liquid and rice or pasta to
the Combi Cooker Pan. Insert Combi Cooker
Pan into Level 1.
2 Move the SmartSwitch to COMBI COOKER,
then use the FUNCTION arrows to select
RICE/PASTA.
3
The function will default to RICE. Use either
the TEMP/SHADE or TIME/SLICES UP arrow
to select PASTA. Use either the TEMP/SHADE
or TIME/SLICES DOWN arrow to go back
to RICE.
4 Press START/STOP to begin cooking.
The display will show circulating bars
while cooking.
5 When the rice or pasta is fully cooked,
the unit will beep and the timer will begin
counting up. This will help to keep ingredients
warm until ready for serving.
9
ninjakitchen.com
- CONT.
TM
Keep Warm
1
After your food has finished cooking using
another function, insert the Combi Cooker
Pan into Level 1.
2 Move the SmartSwitch to COMBI COOKER,
then use the FUNCTION arrows to select
KEEP WARM.
3 Press START/STOP to begin cooking.
The display will show time counting up.
4 When finished using the function, press
START/STOP to turn off the unit.
USING THE AIR FRY/STOVETOP FUNCTIONS
To turn on the unit, plug the power cord into a
wall outlet, then press the button.
Air Fry
1 Place the crisper plate in the Combi Cooker Pan.
2 Place ingredients on the crisper plate, then
insert the Combi Cooker Pan into Level 1.
3
Move SmartSwitch to AIR FRY/STOVETOP,
the unit will default to AIR FRY. The default
temperature setting will display. Use the
TEMP/SHADE arrows to select a temperature
from 250°F to 400°F in either 10- or
15-degree increments.
+
4 Use the TIME/SLICES arrows to select a cook
time up to 1 hour in 1-minute increments.
NOTE: For best results, it is recommended to
periodically shake ingredients during air frying.
You can open the door and toss ingredients
with silicone tipped tongs for even browning.
When done, insert the Combi Cooker Pan back
into Level 1, and close the door.
5 Press START/STOP to begin cooking.
6 When cook time reaches zero, the unit
will beep and display "End".
Bake
1
Reference the Inspiration Guide for direction
on how to assemble ingredients and
accessories based on recipes/charts.
2 Move SmartSwitch to AIR FRY/STOVETOP,
then use the FUNCTION arrows to select
BAKE. The default temperature setting will
display. Use the TEMP/SHADE arrows to
select a temperature from 300°F to 400°F in
either 10- or 15-degree increments.
+
3 Use the TIME/SLICES arrows to select a cook
time up to 1 hour in 1-minute increments.
4 Press START/STOP to begin cooking.
5 When cook time reaches zero, the unit
will beep and "End".
NOTE: The unit will preheat for 3 minutes
before the timer starts.
ninjakitchen.com
10