Shark NINJA COMBI SFP703CO Owner's Manual page 4

USING YOUR NINJA COMBI
USING THE COMBI COOKER FUNCTIONS
To turn on the unit, plug the power cord into a
wall outlet, then press the button.
Combi Meals
1
Add liquid and ingredients to the Combi
Cooker Pan according to the recipe/meal chart.
2 Add ingredients to the bake tray.
3 Insert the Combi Cooker Pan into Level 1
(bottom position) and the bake tray into Level
2 (top position).
4 Move the SmartSwitch up to COMBI COOKER,
then use the FUNCTION arrows to select
COMBI MEALS. The default setting will display.
Use the TEMP/SHADE arrows to select a
temperature from 250°F to 450°F in either
10- or 15-degree increments.
+
NOTE: Temperatures over 400°F only extend
to 30 minutes.
5
Use the TIME/SLICES arrows to select a cook
time up to 1 hour in 1-minute increments.
6 Press START/STOP to begin cooking.
7 The display will show progress bars, indicating
the unit is building steam. When the unit
reaches the appropriate steam level, the timer
will begin counting down.
8
When cook time reaches zero, the unit will
beep and display "End". If your food requires
more time, use the up arrows to the right of
the display to add additional time. The unit
will skip preheating.
7
ninjakitchen.com
TM
Combi Crisp
1
Reference the Inspiration Guide for direction on
how to assemble ingredients and accessories
based on recipes/charts. Be sure to add water
to the Combi Cooker Pan.
2 Move SmartSwitch to COMBI COOKER.
Use the FUNCTION arrows to select Combi
Crisp. The default setting will display. Use the
TEMP/SHADE arrows to select a temperature
from 250°F to 450°F in either 10- or
15-degree increments.
+
3 Use the TIME/SLICES arrows to select
a cook time up to 1 hour in
1-minute increments.
4 Press START/STOP to begin cooking.
5 The display will show progress bars,
indicating the unit is building steam.
6 When the unit reaches the appropriate steam
level, the timer will begin counting down.
7 When cook time reaches zero, the unit will
beep and display "End". If your food requires
more time, use the up arrow to the right of
the display to add additional time. The unit
will skip preheating.
Combi Bake
1
Reference the Inspiration Guide for direction
on how to assemble ingredients and
accessories based on recipes/charts. Be sure
to add water to the Combi Cooker Pan.
2
Move SmartSwitch to COMBI COOKER, then
use the FUNCTION arrows to select COMBI
BAKE. The default temperature setting will
display. Use the TEMP/SHADE arrows to
select a temperature from 250°F to 450°F in
either 10- or 15-degree increments.
+
3 Use the TIME/SLICES arrows to select
a cook time up to 1 hour 15 minutes in
1-minute increments.
4 Press START/STOP to begin cooking.
5
The display will show progress bars indicating
the unit is building steam. This will take about
20 minutes.
6 When preheating has completed, the timer will
begin counting down.
7
When cook time reaches zero, the unit will beep
and display "End". If your food requires more time,
use the up arrow to the right of the display to
add additional time. The unit will skip preheating.
Steam
1
To get started, add water to the Combi Cooker
Pan, then place the crisper plate in the pan.
Add ingredients to the crisper plate, then insert
the pan into Level 1.
2 Move SmartSwitch to COMBI COOKER,
then use the FUNCTION arrows to
select STEAM.
3
Use the TIME/SLICES arrows to select a
cook time up to 1 hour in 1-minute increments.
NOTE: There is no temperature adjustment
when using the STEAM function.
4 Press START/STOP to begin cooking.
5
The unit will begin preheating to bring the
liquid to a boil. The display will show progress
bars, indicating the unit is building steam.
When preheating has completed, the timer
will begin counting down.
NOTE: After cycle is complete, remove ALL
food and accessories, then close the door and
press the START/STOP button to begin the dry
cycle. This will help to remove excess water.
6 When cook time reaches zero, the unit will
beep and display "End".
ninjakitchen.com
8