Pioneer SD-T292 Operating Instructions Manual

Operating
Instructions
"Note to CATV system installer:
This reminder is provided to call the CATV system installer's at-
tention to Article 820-22 of the NEC that provides guidelines for
proper grounding and, in particular, specifies that the cable
ground shall be connected to the grounding system of the build-
ing, as close to the point of cable entry as practical."
Your new Pioneer Hi-Fi Monitor Receiver incorporates a
host of features designed to give you excellent perfor-
mance if you follow the instructions in this manual. We
recommend that you read the following instructions
before turning on your Hi-Fi Monitor Receiver for the first
time.
IMPORTANT
Hi-Fi MONITOR RECEIVER
SD-T292
RD/G
RD/Q
RD/Q1
NTSC/PAL/SECAM
BUILT-IN MTS DECODER
LINE VOLTAGE SELECTOR SWITCH
Only muiti-voitage models are provided with this switch.
U.S. and Canadian models are not provided with a voltage
selector. Mains voltages in Saudi Arabia are 127 V and 220 V
only,
You will find the line voltage selector switch on the rear
panel. Before your model is shipped from the factory, the
switch is set to the power requirements of the destination;
nevertheless, you should check that it is set properly before
plugging the power cord into the AC wall socket. If the vol-
tage is not properly set, or if you move to an area where the
voltage requirements differ, adjust the selector switch as fol-
lows:
Before adjusting, disconnect the power cord.
Insert a medium-sized screwdriver into the groove of the
selector switch and set it to the voltage value of your area.
VOLTAGE SELECTOR
110-127
Groove
The lightning flash with arrowhead,
within an equilateral triangle, is intended
to alert the user of the presence of unin-
sulated ''dangerous voltage" within the
product's enclosure that may be of suffi-
cient magnitude to constitute-a risk of
electric shock to persons,
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN =
CAUTION:
TO PREVENT THE RISK OF ELEC-
TRIC SHOCK, DO NOT REMOVE
COVER (OR BACK). NO USER SERV-
ICEABLE PARTS INSIDE. REFER
SERVICING TO QUALIFIED SERVICE
PERSONNEL.
©) PIONEER'
The future of sound and vision.
The exclamation point within an
equilateral triangle is intended to alert
the user to the presence of important
operating and maintenance (servicing)
instructions in the literature accompany-
ing the appliance.