Advertisement
Control Panel
Front Panel
@ Input Jack
Through
this
jack,
signal
is fed
from
an
external
device
such as a
musical instrument and mixer.
* This Input Jack has priority to another
input jack on the rear panel.
@ Bypass Switch with Bypass indicator
When
the DE-200
is turned to the
Bypass
mode,
only
direct
sound
is
sent out.
* This Bypass Switch is not mechanical,
therefore
does
not
function
when
the unit is turned off.
@ Input Level Control with the Input
Level indicator
This adjusts the input level
@ Delay Time Range Control
This
switch
selects
any
delay time
range
among
9 options
of 25
to
640ms,
© Delay Time Fine Control
This
knob
is to
delicately
change
the delay
time set with
the Delay
Time Range Control.
!t is continuous-
ly variable
from
0.5 to 1.0 times,
*By
using
above two controls @ and
© , it is possible to continuously alter
the delay time from 1.25 to 640 ms.
@ Mode Switch with Mode Indicator
This
switch
can
double
the delay
time which is set with the Delay Time
Range
and
the
Delay
Time
Fine
Controls.
@ Hold Switch with Hold Indicator
This
switch
is used
to retain
the
data of panel settings.
® Modulation Rate Control
This is to change the LEO frequency
for modulation.
DELAY TIME
RANGE:msi
MODE
HOLD
asT ats 9 ON Morr
© Modulation Depth Control
This sets the depth of the LFO
modulation.
@ Feedback Level Control
This adjusts the feedback level.
® Feedback Phase Switch with Feed-
back-Phase Indicator.
This is to invert the feedback signal.
@ Direct Output Controt
This controts the output level of the
direct sounds.
@ Detay Output Control
This adjusts the output level of the
delay sounds.
@ Output Jack
Through
this jack, the mixed signal
of the delay and direct comes out.
@ Power Switch with Power indicator
Advertisement
