Dc Operation - Yaesu FT-1000MP Operating Manual

Installing Internal Accessories
DC Operation
Enabling DC Input for Operation
© Disconnect all cables from the transceiver.
© Next remove the upper two screws in either side
of the front panel, and loosen the lower two.
Then pull the panel forward slightly before fold-
ing it down.
Ol Locate the AC/DC operation plug through the
access cutout.
@)
EN O
=
oO ®
.o)
Chassis Left Side Chassis Front Left
Press on retaining clip
iw to remove plug
J
— O
DC
Operation
t
Move plug and insert
in lower connector for
DC operation.
fe) CS)
oO
Left Side Panel of FT-1000MP
© Fold up the front panel, replace and tighten its
screws, then replace the top and bottom cov-
ers.
page 103