Table of Contents
Advertisement
SETUP AND TESTING
INSTALLER SETUP WIZARD AND
INSTALLER SETTING
The first time the thermostat is powered up (or
after a factory reset) it will enter the Installer
Setup Wizard All Installer Settings can be set
through this process The Installer Settings are
also accessible in the Installer Menu
HOW TO ENTER THE INSTALLER MENU:
1. Press Select to enter the Main Menu
2. Use
to navigate to Settings, press
or
SELECT
3. Press and hold
and
for 3 seconds to
unlock the Installer option
4. Use
or
to navigate to Installer,
press SELECT Refer to the chart at right for
options
16
INSTALLER
MENU OPTIONS
DESCRIPTION
Essential HVAC
HVAC Settings
equipment (equipment
type, stages, etc)
Advanced HVAC control
HVAC Advanced
(effsets, deadbands,
staging, protection, etc)
Installer test for
Test
configured equipment
relay outputs
Reset all settings to
Reset
factory default
HVAC INSTALLER SYSTEM SETTINGS TABLE
The following table contains the system settings and their details Default settings are shown in
bold The availability of some settings is dependent upon the value of other settings
TABLE 1 – HVAC INSTALLER SYSTEM SETTINGS
System setting
Description
Equipment Type
NOTE: Equipment Type related settings
(S84N SU only)
will return to defaults if this is changed
Selects O or B reversing valve
O/B Energized For?
operation (Heat Pump mode only)
Used to lockout heating or cooling
Control Setup
outputs (Heat/Cool mode only)
Heat Pump Auxiliary
Selects auxiliary type (Heat Pump
Type (S84N SU only)
mode only)
Selects thermostat or equipment to
Fan Control in Heating
control the fan in heating (Heat/Cool
mode only)
Factory default setting
(bold) and setting range
Heat/Cool
Heat Pump
Cooling
Heating
Heat & Cool
Heat Only
Cool Only
Gas/Oil Heat
Electric Heat
Gas/Oil Heat
Electric Heat
17
Advertisement
Table of Contents
