Related Manuals for Aprilaire S86W MUPR
Summary of Contents for Aprilaire S86W MUPR
- Page 1 HEATING Thermostats OWNER’S MANUAL Model S86W MUPR Wi-Fi Thermostat with IAQ READ AND SAVE THESE INSTRUCTIONS...
-
Page 2: Table Of Contents
TABLE OF CONTENTS ABOUT YOUR NEW THERMOSTAT ABOUT YOUR NEW THERMOSTAT 3 PROGRAM SCHEDULE AND HOLDS 21 Thermostat Features 3 Set Time and Date 21 THERMOSTAT FEATURES... -
Page 3: Quick Reference To Controls & Display
QUICK REFERENCE TO CONTROLS & DISPLAY MAIN MENU Main Menu HOME SCREEN Mode Hold UP ARROW EQUIPMENT Main Menu Schedule STATUS Heat Blast Mode HEATING Away BACK ROOM TEMPERATURE Humidifier Hold Dehumidifier Schedule SELECT (OPENS ROOM Heat Blast Ventilation MENU FROM TEMPERATURE HOME SCREEN) SETTING... -
Page 4: Screen Saver
Starts 45 seconds after inactivity, press any button to wake the screen. For detailed instructions for connecting the thermostat to a Wi-Fi network and registering it to an AprilAire account, refer to the Wi-Fi Quick Start Guide included in the box Visit aprilaire.com/app for instructions... -
Page 5: Operation
OPERATION CHANGE TEMPERATURE SETTING 1. From the Home screen press adjust the current temperature setting SELECT SYSTEM MODE 2. The temperature setting will enlarge during (EM HEAT / HEAT / COOL / AUTO / OFF) HEATING adjustment 3. The temperature setting will take effect 3 1. -
Page 6: Select Fan Setting (Auto / On / Circulate)
SELECT FAN SETTING (AUTO / ON / CIRCULATE) MAINTENANCE REMINDERS When the fan mode is changed during a program Maintenance reminders are set up by the installer to indicate when the equipment is due for event, it remains in that mode until the next event service. -
Page 7: Indoor Air Quality Functions
3. Modes (persistent) INDOOR AIR QUALITY FUNCTIONS Auto: The air cleaner will run a minimum of 30 minutes every hour The air cleaner Air Cleaning will monitor the amount of time your 3 Hrs EVENT-BASED™ AIR CLEANING (IF INSTALLED) 24 Hrs heating and cooling system runs;... -
Page 8: Humidifier Control
AUTOMATIC MODE HUMIDIFIER CONTROL (IF INSTALLED) In Automatic Mode, you will receive the optimal amount The thermostat can be of humidity so that your home and its furnishings will Humidity Setting configured, through the be protected from the potentially damaging effects of Automatic Installer set-up, to control excessive or insufficient humidity during the heating... -
Page 9: Manual Mode
MANUAL MODE DEHUMIDIFIER CONTROL (IF INSTALLED) In Manual Mode, it is important to anticipate drops and The thermostat can be configured, through the installer react to increases in outdoor temperature to maintain RH Settings set-up, to control dehumidification with either a whole as much humidity as possible while avoiding window home dehumidifier or with the air conditioner (cooling unit). -
Page 10: If Dehumidification Is Done
IF DEHUMIDIFICATION IS DONE WITH THE AIR CONDITIONER FRESH AIR VENTILATION (IF INSTALLED) The thermostat will cool up to 3°F beyond the cooling setpoint for dehumidification. This thermostat can be configured, through the NOTE: overcooling may not be sufficient to meet the dehumidification setpoint. Installer set-up, to control fresh air ventilation based on a predetermined hourly schedule ENERGY SAVING TIP #1:... -
Page 11: Program Schedule And Holds
Ventilation has two temporary events and two PROGRAM SCHEDULE AND HOLDS permanent modes that can be set 3. Events (temporary) Ventilation 3 Hrs 3 Hours: Ventilation will be constantly SET TIME AND DATE 24 Hrs energized for 3 hours and then the fresh air mode will return to Auto or Off depending 1. -
Page 12: Understanding Program Schedules
UNDERSTANDING PROGRAM SCHEDULES TABLE 2 – DEFAULT SCHEDULE Set Temperature The daily schedule is split into four sections: Event Designator Start Time Heat Cool Wake: Temperature you would prefer to wake up to Wake 6:00 AM 70°F (21°C) 78°F (255°C) Auto Leave: Temperature when you are away from the house Leave... -
Page 13: How To Modify Program Schedules
HOW TO MODIFY PROGRAM SCHEDULES 1. From the Schedule option in the 5. Adjust Leave details and/or select Leave Return Sleep Main Menu, you can turn the Next to proceed Next Next Next schedule on or off, and make 6. Adjust Return details and/or select changes to the schedule Main Menu Start... -
Page 14: Program Schedule Holds
HEAT BLAST® (IF INSTALLED) PROGRAM SCHEDULE HOLDS TEMPORARY HOLD Heat Blast® will raise the current room temperature 3°F to 5°F based on the installer set-up, and HEATING then resume normal operation Press to immediately adjust the temperature when the schedule is running This will temporarily hold the temperature To activate Heat Blast, select Heat Blast from the Menu, and use the Select button to set the setting until the next scheduled event toggle to ON... -
Page 15: Wi-Fi Maintenance And
WI-FI MAINTENANCE AND TROUBLESHOOTING DISABLING THE WI-FI RADIO To turn off the Wi-Fi radio on the thermostat, enter the Advanced Wi-Fi Settings menu (Menu > Settings > Wi-Fi > Advanced > Wi-Fi ON/OFF) Then select OFF and press SELECT This will turn off CLEARING ROUTER SETTINGS the Wi-Fi radio, but maintain all network settings. -
Page 16: Setup Menu 30
Select button for 7 seconds Visit us online at www.aprilaire.com to register your AprilAire product. If you do not have online access, please mail a postcard with your name, address, phone number, email address, product purchased, model number, date of purchase, and dealer name and address to: Research Products Corporation, P.O. -
Page 17: Fcc And Ised Compliance Statements
FCC multi-transmitter product procedures B2208825B • 61001877 • 1.22 © 2022 AprilAire | aprilaire.com | 800.334.6011 U.S. Patent Numbers 8,146,376, 8,596,078, 9,874,366 and other patents pending. AprilAire reserves the right to change specifications without notice.