3, Useful Functions For - Roland D-50 Owner's Manual

EDITING
3. USEFUL FUNCTIONS FOR EDITING
a. Compare
While editing a parameter, you may wish to hear the original sound
before it was edited. The D-—50's Compare function allows you to
call the original Patch without erasing the edited sound.
Step 1 Push the Compare Button once.
COMPARE
Hj
The Display responds as shown below, and the original sound may
be heard by playing the keyboard.
dR a oe oR I eye Spe SRR HE at eo de EH
Step 2 Push the Compare Button again, and the edited sound will come
back,
In this Compare mode, the edited sound is temporarily saved, and
therefore remains even after calling a different Patch.(This does not
apply when the D-50 is turned off.) Hold the Compare Button
down while pushing the Shift Key, and the edited sound will be
recalled,
* When the Display shows the Compare mode indication, editing cannot
be achieved.
b. Undo
The Undo function returns the current value of the parameter to
the original value before being edited. This only refers to the last
parameter that has been adjusted.
Simply push the Undo Button.
UNDO
vm
c, Copy
The Copy function can copy the parameters of a Tone or Block to-
a different location.
@Tone Copy
A Tone from another Patch can be copied to the Patch currently
selected.
14