Table of Contents
Advertisement
Danfoss ECtemp Touch
5.
If you have already made
the installation setup online,
press ENTER CODE and go
directly to Step 13 now. Oth-
erwise press SETUP WIZARD
and go to Step 6.
6.
On the SETUP information
screen, press
7.
Use the < and > arrows to
select whether only a floor
sensor or a combination of
room and floor sensors
should be used. Press
confirm.
Note: A "room only" option may also be available. For details, see
the "Maximum Floor Temperature" section.
Installation Guide
to start.
to
11
Advertisement
Table of Contents
