Vertex Standard VXA-150 Operating Manual page 35

LAMP
Function: LCD and Keypad Illumination Mode
Available Values: KEY/TGL/5
Default Setting: KEY
In the "KEY" mode, the lamp will be activated for 5
seconds when any front panel key is pressed.
In the "TGL" mode, the LAMP switch toggles the
lamp on and off.
In the "5" mode, the LAMP switch activates the lamp
for 5 seconds.
SFT
Function: CPU Clock Shift
Available Values: on/oFF
Default Setting: oFF
This function is only used to move a spurious re-
sponse "birdie" should it fall on a desired frequency.
Consult your Vertex Standard dealer for details re-
garding this function.
VXA-150 P V O
RO PERATING
M ( "S " )
ENU ET
PRTM
Function: Priority Checking Time
Available Values: 05/10/15/20/25/30 (x0.1 sec)
Default Setting: 15 (1.5 seconds)
This Menu item allows you to define how often the
Priority Channel will be checked for activity.
Note: The Dual Watch Polling time is 500 mS (fixed).
DWMD
Function: Select the Dual Watch/Priority Function
Available Values: DW/PRI
Default Setting: DW
In the DW mode, the VXA-150 will activate the Dual
Watch feature when you press [ F ] à [ SCAN ( DW )] .
In the PRI mode, the VXA-150 will activate the Pri-
ority feature when you press [ F ] à [ SCAN ( DW )] .
POBP
Function: Select the style of the audible "Beeps" at
Power-on
Available Values: 1/2/3/oFF (the selections will be
heard as you select them)
Default Setting: 1
M
ANUAL
M
ODE
33