Vertex Standard VX-920 Operating Manual page 19

S S
TATUS ET
Press the assigned programmable key to change the
5-Tone status code. To change the status code, select
the desired digit by [ A ] key, then change the number
by [ B ] / [ C ] key, and store the number by [ D ] key.
S U /D
TATUS P OWN
Press the assigned programmable key to select a 5-
Tone status code from the pre-defined status list.
S C
TATUS HECK
Press the assigned programmable key to check the
5-Tone receive status code. When you press this key,
the LCD display will indicate the "Message" corre-
sponding to the receive status condition per the pre-
defined status list.
L W
ONE ORKER
Press the assigned programmable key to toggle the
Lone Worker feature "On" and "Off."
The Lone Worker feature is designed to emit an alarm
for 30 seconds when the Lone Worker Timer (pro-
grammed by your Dealer) has expired. If the user
does not reset the timer by pressing the PTT switch,
the radio switches to the Emergency mode.
VX-920 O M
PERATING ANUAL
A O
DVANCED PERATION
DTMF C
You may send the desired telephone number manu-
ally.
To dial a number manually, press the assigned pro-
grammable key, then press the desired numbers on
the front panel's numeric key. Now, press the PTT
switch to send the telephone number. The DTMF
tones sent during the dialing sequence will be heard
in the speaker.
TA S
Press the assigned programmable key to toggle the
TA (Talk Around) scan feature "On" and "Off."
While TA scan is proceeding, the VX-920 will search
both the transmit and receive frequencies (the " "
icon will blink). When a signal is encountered on
the receive frequency, the VX-920 will pause until
the signal disappears (" " icon will appear but not
blink). When a signal is encountered on the transmit
frequency, the VX-920 will check for activity on the
receive frequency every few seconds (interval pro-
grammed by your Dealer).
S
ET ( 16-
ODE
KEY VERSION ONLY
CAN
)
17