Vertex Standard VX-920 Operating Manual page 18

S T
ELECTABLE ONE
Press the assigned programmable key to select a sub-
audible tone (CTCSS/DCS) from the pre-defined
tone table. You can operate using the indicated sub-
audible tone in the Selectable Tone mode.
D CH#1
IRECT TO
Press the assigned programmable key to recall the
Dealer pre-programmed channel directly.
REC/PLAY ( V
OICE
This function allows your radio to record a received
voice message, and to play back the recorded audio.
It requires installation of the optional Voice Record-
ing Unit.
Recording;
Press the assigned programmable key for 1.5 sec-
onds to enable the Voice Recording Mode. If the in-
coming signal is received, so as to un-mute the
squelch and pass audio, then the " " Icon will flash
and received audio will be recorded. When the voice
recording is completed, the " " stays on.
16
A
DVANCED
#4
)
S : O
TORAGE PTION
O
PERATION
Playback;
Press the assigned programmable key momentarily
to play back the last message. While playback is pro-
ceeding, press the [ ] key to jump to the previous
message, or press the [ # ] key to jump to the next
message.
To stop the play-back, press this key again.
While playback is proceeding, you may press the [ D ]
key to clear the all messages and stop the play-back.
SQL
You can manually adjust the squelch level using this
function:
Press the assigned programmable key. A tone will
sound, and the current squelch level will appear
on the display.
Press the MONITOR/LAMP button to select the
desired squelch level.
Two seconds after releasing the MONITOR/LAMP
button, the display will revert to the normal chan-
nel indication.
AF M V
IN R
Press the assigned programmable key to reduce the
audio output to the (lower) level programmed by your
Dealer.
VX-920 O M
PERATING ANUAL