Table of Contents
Advertisement
7.
Close the front cover.
Rotate the front cover in the opposite direction of arrow A, and push on the top of the
front cover until it clicks.
8.
Load a paper roll and close the paper cover.
9.
Insert the power cord plug into an electric outlet and turn the power on.
Check that the LED lights green.
Cutter gear
Front cover
CAUTION
Before starting to do maintenance work, be sure to turn off the printer and unplug the
power cord from the electric outlet.
Be careful not to touch the manual cutter while the front cover is open.
Be careful not to touch the opening for the auto cutter while the paper cover is open.
The print head is hot immediately after printing. Do not touch it.
Do not touch the print head with bare hands or metal objects.
If the above procedure does not retract the auto cutter, contact your Citizen Systems dealer.
Front cover release button
— 44 —
Auto cutter blade
Advertisement
Table of Contents
