Table of Contents
Advertisement
BATTERY CHECK
1. After opening the Lens Cover, softly
depress the Shutter Release Button while
covering the Light Sensor Window with your
hand, as illustrated. Do not mark the Window
with your fingerprints.
2. When the red lamp lights up in the top
center of the viewfinder, the batteries are
properly loaded in the camera. If they are
incorrectly loaded, or weak or dead, the
Shutter Release Button cannot be depressed.
nor can film be wound. If the batteries are
getting weak, replace both batteries with fresh
ones.
Battery Power Check
If the batteries are getting weak, the flash
recycle time and the auto winding/rewinding
time will become much slower.
7
Advertisement
Table of Contents
