Table of Contents
Advertisement
4. Close the back cover, and the film will be
automatically wound on to the first frame.
• When the film is being wound on, the red
stripes in the film transport indicator flicker,
indicating that the film is advancing properly, if
not, open the back cover and reload the film.
5. When the frame counter is set to "1," the
auto film winding stops automatically. Now
you are ready to start shooting.
• The film-loaded indicator on the back cover
tells you whether or not film is in the camera.
Caution: Should you wish to remove the film loaded from the camera, never force it, but unload
the film in the normal way described on page 17, to avoid any damage to the take-up spool.
12
Advertisement
Table of Contents
